This hands-on, highly-interactive course includes practical sessions and exercises. Theory learned will be applied using our state-of-the-art simulators.
In this course, we shall be analyzing the riveted and bolted joints used in the oil refineries for the jointing of pipes & plates, for the blinding of pipes, pressure vessels, and heat exchangers. The selection of pipe flanges is well documented in the ASME code and is fairly straight forward when pressures and temperatures are known. The use of the code makes the specific selection of components such as flanged valves, meters, pumps, and compressors also fairly straight forward in most instances.
As a piping designer or engineer, it is, however, essential to have an understanding of the flange joint make-up as a unit. To this end, it is essential to understand the meaning of bolt preload and its importance in the flange joint, when considering external loadings due to:
Material selection will also be discussed. Once materials have been selected for flanges, bolts, and gasket, for a particular joint, the engineer should be able to specify and/ or calculate initial torque requirements and to ensure that the joint will not fail or leak.
The aspect of fatigue loadings will be covered; however, in practice, the cyclic conditions encountered can be extremely difficult to estimate. An example of a pipeline in Alaska will be discussed in this regard. Sometimes, at best, a designer/ engineer can only make assumptions (and judgments based on experience), regarding expected vibration.
Accurate bending and shear loads on flange joints can sometimes only be established from a pipe stress analysis program. Only in special instances will a full finite element analysis have to be carried out for a critical joint. This is best left to the specialists and in this course, no attempt will be made to teach the participants the FEA techniques (e.g. Nuclear Specials). However, research will be discussed to illustrate the process and to give the participants some understanding of FEA techniques when applied to a flange joint. When a flange joint is subjected to critical high temperatures and pressures it is always recommended to give the design to a specialist who has the necessary software available. Circular flat plates will be analyzed and compared to blind flanges, and pressure vessel heat exchanger applications.
By the end of this training course, participants will be able to:
Day 1
Day 2
Day 3
Day 4
Day 5
This course provides systematic techniques and methodologies on bolted flange, gasket design and stress analysis for engineers involved in the design, construction or maintenance of pressurized equipment utilizing flanged joints for the petroleum, refining, chemical, power and process industries.